YASKAWA MP Series User Manual

10.2 Operating Inverters Using an MPE720
10.2.5 I/O Options
10-12
10.2.5 I/O Options
( 1 ) Output Data Options
The parameters OW13 to OW16 are for output data options.
These output data options will be available when:
• The Output Data Option Selection (OW0C) is selected while the command Inverter Drive Control is being
executed.
• The Auxiliary Output Data Option Selection (OW0E) is selected while the subcommand Inverter I/O Con-
trol is being executed.
( 2 ) Input Data Options
The parameters IW13 to IW1F are for input data options.
These input data options will be available when:
• The Input Data Option Selection (OW0D) is selected while the command Inverter Drive Control is being
executed.
• The Auxiliary Input Data Option Selection (OW0F) is selected while the subcommand Inverter I/O Control
is being executed.
Data of selected input options can be monitored by using the Input Data Option Selection Monitor (IW0D) and
Auxiliary Input Data Option Selection Monitor (IW0F) of the monitoring parameters.
( 3 ) Response Speed of Selected Output and Input Data Options
The response speed for the data selected from Output Data Option Selection, Auxiliary Output Data Option Select,
Input Data Option Selection, and auxiliary Input Data Option Selection depends on the amount of selected data. Nor-
mally, it will be six times slower than that for standard I/O data (always available I/O data).

YASKAWA MP Series Specifications

General

Brand	YASKAWA
Model	MP Series
Category	Controller
Language	English