11.6 Parameters That Are Automatically Updated
11.6.5 Parameters Updated during Self-configuration
11-28
* 3. Allocated for the TFF/TLIM function of the position control command.
* 4. Uses Pn834 to Pn83E.
The above processing is not performed when the axis has been set.
The above set values are written to the SERVOPACK’s EEPROM.
[ b ] SERVOPACK Parameters (2)
The above set values are written to the SERVOPACK’s RAM.
MP2000 Series Machine Controller SERVOPACK
SERVOPACK Parameters
SGD-N,
SGDB-N
SGDH +
NS100
SGDH +
NS115
SGDS SGDV SGD7S
Name Setting
Position Error Overflow Range 65535
→
Cn-001E −
Overflow Level 32767
→
− Pn505 −
Excessive Position Error
Alarm Level
2
30
-1
→
− Pn520
Excessive Position Error
Warning Level
100
→
− Pn51E
To Next Page
Loading...
Need help?
General
