Yealink SIP-T46G - Page 154

Configuring Advanced Features
141
Content-Length: 0
URL Record
When a user presses a URL record key for the first time during a call, the IP phone sends
an HTTP GET message to the server.
The example of an HTTP GET message for reference:
Get /phonerecording.cgi?model=yealink HTTP/1.0\r\n
Request Method: GET
Request URI: /phonerecording.cgi?model=yealink
Request version: HTTP/1.0
Host: 10.1.2.224\r\n
User-agent: yealink SIP-T46G 28.71.0.10 00:16:65:11:30:68\r\n
If the recording is successfully started, the server will respond with a 200 OK message.
The example of a 200 OK message for reference:
<YealinkIPPhoneText>
<Title>
</Title>
<Text>
The recording session is successfully started.
</Text>
<YealinkIPPhoneText>
If the recording fails for some reasons, for example, the recording box is full, the server
will respond with a 200 OK message.
The example of a 200 OK message for reference:
<YealinkIPPhoneText>
<Title>
</Title>
<Text>
Probably the recording box is full.
</Text>
<YealinkIPPhoneText>
When the user presses the URL record key for the second time, the IP phone sends an
HTTP GET message to the server, then the server will respond with a 200 OK message.
The example of a 200 OK message for reference:
<YealinkIPPhoneText>
<Title>
</Title>
<Text>