Administrator’s Guide for SIP-T46G IP Phone
168
5. Click Confirm to accept the change.
SNMP (Simple Network Management Protocol) is an Internet-standard protocol for
managing devices on IP networks. It is used mostly in network management systems to
monitor network-attached devices for conditions that warrant administrative attention.
SNMP exposes management data in the form of variables on the managed systems,
which describe the system configuration. These variables can then be queried by the
managing applications. The variables accessible via SNMP are organized in
hierarchies, which are described by Management Information Bases (MIBs).
IP phones only support SNMPv1 and SNMPv2. They act as SNMP clients, which receive
requests from the SNMP server. The SNMP server may send requests from any available
source port to the configured port on the client. The client then responds to the source
port. IP phones only support the GET request from the SNMP server.
The following table lists the basic object identifiers (OIDs) supported by the IP phones:
1.3.6.1.2.1.37459.2.1.1.0
The textual identification of the
contact person for the IP phone,
together with the contact information.
1.3.6.1.2.1.37459.2.1.2.0
An administratively-assigned name
for the IP phone. If the name is
unknown, the value is a zero-length
string.
1.3.6.1.2.1.37459.2.1.3.0
The physical location of the IP phone.
1.3.6.1.2.1.37459.2.1.4.0
The time (in milliseconds) since the
network management portion of the
system was last re-initialized.
1.3.6.1.2.1.37459.2.1.5.0
The firmware version of the IP phone.
1.3.6.1.2.1.37459.2.1.6.0
The hardware version of the IP phone.
1.3.6.1.2.1.37459.2.1.7.0
1.3.6.1.2.1.37459.2.1.8.0
The MAC address of the IP address.
1.3.6.1.2.1.37459.2.1.9.0
The IP address of the IP phone.
1.3.6.1.2.1.37459.2.1.10.0
The version of auto provisioning.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
