Yealink SIP-T46G - Page 250

Appendix
237
Example
network.internet_port.speed_duplex = 0
PC Port Negotiation
Parameter-
network.pc_port.speed_duplex
Configuration File
<y000000000028>.cfg
Description
Specifies the transmission method of PC port.
Note: We recommend that you do not change
this parameter.
Format
Integer
Default Value
0
Range
Valid values are:
0-Auto negotiate
1-Full duplex, 10Mbps
2-Full duplex, 100Mbps
3-Half duplex, 10Mbps
4-Half duplex, 100Mbps
5-Full duplex, 1000Mbps
Example
network.pc_port.speed_duplex = 0
Replace Rule
Parameter-
dialplan.replace.prefix.X =
Configuration File
<y000000000028>.cfg
Description
Specifies the string you want to replace.
X ranges from 1 to 20.
Format
String
Default Value
Blank
Range
Not Applicable
Example
dialplan.replace.prefix.1 = 91([5-7])12
Parameter-
dialplan.replace.replace.X =
Configuration File
<y000000000028>.cfg
Description
Specifies the alternate string instead of what
the user enters.