Yealink SIP-T46G - Page 249

Administrator’s Guide for SIP-T46G IP Phone
236
Format
String
Default Value
Blank
Range
Not Applicable
Example
network.pppoe.user = xmyealink
Parameter-
network.pppoe.password
Configuration File
<y000000000028>.cfg
Description
Configures the PPPoE password when the
Internet port type is configured as PPPoE.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
String
Default Value
Blank
Range
Not Applicable
Example
network.pppoe.password = yealink123
Internet Port Negotiation
Parameter-
network.internet_port.speed_d
uplex
Configuration File
<y000000000028>.cfg
Description
Specifies the transmission method of Internet
port.
Note: We recommend that you do not change
this parameter.
Format
Integer
Default Value
0
Range
Valid values are:
0-Auto negotiate
1-Full duplex, 10Mbps
2-Full duplex, 100Mbps
3-Half duplex, 10Mbps
4-Half duplex, 100Mbps
5-Full duplex, 1000Mbps