Yealink SIP-T46G - Page 280

Appendix
267
to clear messages between the SIP Client
and SIP Server.
X ranges from 1 to 6.
Format
Float
Default Value
5
Range
Not Applicable
Example
account.1.advanced.timer_t4 = 10
Parameter-
account.x.session_timer.enable
Configuration File
<MAC>.cfg
Description
Enables or disables the session timer for
account X.
If set to 1 (Enabled), IP phone sends periodic
re-INVITE requests to refresh the session
during a call.
X ranges from 1 to 6.
Format
Boolean
Default Value
0
Range
0-Disabled
1-Enabled
Example
account.1.session_timer.enable = 1
Parameter-
account.x.session_timer.expires
Configuration File
<MAC>.cfg
Description
Configures the IP phone to refresh the session
during a call at regular intervals (in seconds)
for account X.
If set to 1800 (1800s), the IP phone refreshes
the session during a call before 1800
seconds.
X ranges from 1 to 6.
Format
Integer
Default Value
1800
Range
1-9999