Yealink SIP-T46G - Page 281

Administrator’s Guide for SIP-T46G IP Phone
268
Example
account.1.session_timer.expires = 300
Parameter-
account.x.session_timer.refresher
Configuration File
<MAC>.cfg
Description
Configures the session timer refresher for
account X.
If set to 0 (UAC), refreshing the session is
performed by the IP phone.
If set to 1 (UAS), refreshing the session is
performed by a SIP server.
X ranges from 1 to 6.
Format
Integer
Default Value
0
Range
Valid values are:
0-UAC
1-UAS
Example
account.1.session_timer.refresher = 1
Parameter-
features.play_hold_tone.enable
Configuration File
<y000000000028>.cfg
Description
Enables or disables the IP phone to play a
tone when there is a hold call on the IP
phone.
Format
Boolean
Default Value
1
Range
0-Disabled
1-Enabled
Example
features.play_hold_tone.enable = 1
Parameter-
features.play_hold_tone.delay
Configuration File
<y000000000028>.cfg
Description
Specifies the interval (in seconds) at which
the IP phone plays a hold tone.
If set to 30 (30s), the IP phone plays a hold