Yealink SIP-T46G - Page 297

Administrator’s Guide for SIP-T46G IP Phone
284
Parameter-
account.x.dialoginfo_callpickup
Configuration File
<MAC>.cfg
Description
Configures the Dialog-Info Call Pickup feature
for account X.
If set to 1 (Enabled), call pickup is
implemented through SIP signals.
X ranges from 1 to 6.
Format
Boolean
Default Value
0
Range
0-Disabled
1-Enabled
Example
account.1.dialoginfo_callpickup = 1
Parameter-
wui.http_enable
Configuration File
<y000000000028>.cfg
Description
Enables or disables the IP phone to access its
web user interface using HTTP protocol.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Boolean
Default Value
1
Range
0-Disabled
1-Enabled
Example
wui.http_enable = 1
Parameter-
network.port.http
Configuration File
<y000000000028>.cfg
Description
Configures the HTTP port to access the web
user interface of the IP phone.
The default HTTP port is 80.
Note: If you change this parameter, the IP