Yealink SIP-T46G - Page 298

Appendix
285
phone will reboot to make the change take
effect.
Format
Integer
Default Value
80
Range
1 to 65535
Example
network.port.http = 90
Parameter-
wui.https_enable
Configuration File
<y000000000028>.cfg
Description
Enables or disables the IP phone to access its
web user interface using HTTPS protocol.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Boolean
Default Value
1
Range
0-Disabled
1-Enabled
Example
wui.https_enable = 1
Parameter-
network.port.https
Configuration File
<y000000000028>.cfg
Description
Configures the HTTPS port to access the web
user interface of the IP phone.
The default HTTPS port is 443.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Integer
Default Value
443
Range
1 to 65535
Example
network.port.https = 100