Yealink SIP-T46G - Page 320

Appendix
307
Parameter-
multicast.codec
Configuration File
<y000000000028>.cfg
Description
Specifies a multicast codec for the IP phone
to use to send an RTP stream.
Format
string
Default Value
G722
Range
Valid values are:
 PCMU
 PCMA
 G729
 G722
 G726-16
 G726-24
 G726-32
 G726-40
 G723_53
Example
multicast.codec = G722
Parameter-
multicast.receive_priority.enable
Configuration File
<y000000000028>.cfg
Description
Enables or disables the IP phone to handle
the incoming multicast paging calls when
there is an active multicast paging call on
the IP phone.
If set to 1 (Enabled), the IP phone will
answer the incoming multicast paging call
with a higher priority and ignore that with a
lower priority.
Format
Boolean
Default Value
1
Range
0-Disabled
1-Enabled