Yealink SIP-T46G - Page 321

Administrator’s Guide for SIP-T46G IP Phone
308
Example
multicast.receive_priority.enable =1
Parameter-
multicast.receive_priority.priority
Configuration File
< y000000000028 >.cfg
Description
Configures the priority of multicast paging
calls.
1 is the highest priority, 10 is the lowest
priority.
If set to 0, all incoming multicast paging
calls will be automatically ignored.
Format
Integer
Default Value
10
Range
0 to10
Example
multicast.receive_priority.priority = 10
Parameter-
multicast.listen_address.x.label
Configuration File
< y000000000028 >.cfg
Description
Configures the label to be displayed on the
LCD screen when receiving the RTP
multicast.
X ranges from 1 to 10.
Format
String
Default Value
Blank
Range
Not Applicable
Example
multicast.listen_address.1.label = 10
Parameter-
multicast.listen_address.x.ip_addr
ess
Configuration File
< y000000000028 >.cfg
Description
Configures the multicast address and port
number that the IP phone listens to.
X ranges from 1 to 10.
Note: The valid multicast IP addresses
range from 224.0.0.0 to 239.255.255.255.
Format
String