Yealink SIP-T46G - Page 334

Appendix
321
Parameter-
network.qos.rtptos
Configuration File
<y000000000028>.cfg
Description
Configures the DSCP for voice packets.
The default DSCP value for RTP packets is
46 (Expedited Forwarding).
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Integer
Default Value
46
Range
0 to 63
Example
network.qos.rtptos = 50
Parameter-
network.qos.signaltos
Configuration File
<y000000000028>.cfg
Description
Configures the DSCP for SIP packets.
The default DSCP value for SIP packets is 26
(Assured Forwarding).
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Integer
Default Value
26
Range
0 to 63
Example
network.qos.signaltos = 30
Parameter-
account.x.nat.nat_traversal
Configuration File
<MAC>.cfg
Description
Enables or disables the NAT traversal for
account X.
X ranges from 1 to 6.