Yealink SIP-T46G - Page 342

Appendix
329
form_interval
Description
Sets the interval (in seconds) to report its
configuration information to the ACS.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Integer
Default Value
60
Range
Not Applicable
Example
managementserver.periodic_inform_interval
= 120
Parameter-
network.ip_address_mode
Configuration File
<y000000000028>.cfg
Description
Specifies the IP address mode.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Integer
Default Value
0
Range
Valid values are:
0-IPv4
1-IPv6
2-IPv4&IPv6
Example
network.ip_address_mode = 2
Parameter-
network.ipv6_internet_port.type
Configuration File
<y000000000028>.cfg
Description
Specifies the IPv6 address assignment
method.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Integer