Yealink SIP-T46G - Page 341

Administrator’s Guide for SIP-T46G IP Phone
328
Range
Not Applicable
Example
managementserver.connection_request_usern
ame = acsuser
Parameter-
managementserver.connection
_request_password
Configuration File
<y000000000028>.cfg
Description
Sets the password for the IP phone to
authenticate the incoming connection
requests.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
String
Default Value
Blank
Range
Not Applicable
Example
managementserver.connection_request_pass
word = acspwd
Parameter-
managementserver.periodic_in
form_enable
Configuration File
<y000000000028>.cfg
Description
Enables or disables the IP phone to
periodically report its configuration
information to the ACS.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Boolean
Default Value
1
Range
0-Disabled
1-Enabled
Example
managementserver.periodic_inform_enable =
1
Parameter-
managementserver.periodic_in
Configuration File
<y000000000028>.cfg