Yealink SIP-T46G - Page 340

Appendix
327
Example
managementserver.username = user1
Parameter-
managementserver.password
Configuration File
<y000000000028>.cfg
Description
Enters the password to authenticate with the
ACS. This string is set to the empty string if no
authentication is required.
Note: If you change this parameter, the phone
will reboot to make the change take effect.
Format
String
Default Value
Blank
Range
Not Applicable
Example
managementserver.password = pwd123
Parameter-
managementserver.url
Configuration File
<y000000000028>.cfg
Description
Specifies the URL of the ACS.
Note: If you change this parameter, the phone
will reboot to make the change take effect.
Format
String
Default Value
Blank
Range
Not Applicable
Example
managementserver.url =
http://192.168.1.20/acs/
Parameter-
managementserver.connection
_request_username
Configuration File
<y000000000028>.cfg
Description
Sets the username for the IP phone to
authenticate the incoming connection
requests.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
String
Default Value
Blank