Yealink SIP-T46G - Page 339

Administrator’s Guide for SIP-T46G IP Phone
326
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect. It is only applicable to the EAP-TLS
protocol. The format of the certificate must
be *.pem or *.cer.
Format
String
Default Value
Blank
Range
Not Applicable
Example
network.802_1x.client_cert_url =
http://192.168.1.10/ client.pem
Parameter-
managementserver.enable
Configuration File
<y000000000028>.cfg
Description
Enables or disables the TR-069 feature on the
IP phone.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Integer
Default Value
0
Range
0-Disabled
1-Enabled
Example
managementserver.enable = 1
Parameter-
managementserver.username
Configuration File
<y000000000028>.cfg
Description
Enters the username to authenticate with the
ACS. This string is set to the empty string if no
authentication is required.
Note: If you change this parameter, the phone
will reboot to make the change take effect.
Format
String
Default Value
Blank
Range
Not Applicable