Yealink SIP-T46G - Page 346

Appendix
333
Parameter-
features.headset_training
Configuration File
<y000000000028>.cfg
Description
Enables or disables the dual headset
feature.
If set to 1 (Enabled), users can use two
headsets on one phone. When the IP
phone joins in a cal, the users with the
headset connected to the headset jack
have a full-duplex conversation, while the
users with the headset connected to the
handset jack are only allowed to listen to.
Format
Boolean
Default Value
0
Range
0-Disabled
1-Enabled
Example
features.headset_training = 1
Parameter-
account.X.codec.Y.enable
Configuration File
<MAC>.cfg
Description
Enables or disables the IP phone to use the
specific codec for account X.
X ranges from 1 to 6.
Y ranges from 0 to 13.
Format
Boolean
Default Value
When Y=0, the default value is 1;
When Y=1, the default value is 1;
When Y=2, the default value is 0;
When Y=3, the default value is 0;
When Y=4, the default value is 1;
When Y=5, the default value is 1;
When Y=6, the default value is 0;
When Y=7, the default value is 0;
When Y=8, the default value is 0;