Yealink SIP-T46G - Page 347

Administrator’s Guide for SIP-T46G IP Phone
334
When Y=9, the default value is 0;
When Y=10, the default value is 0;
When Y=11, the default value is 0;
When Y=12, the default value is 0;
When Y=13, the default value is 0.
Range
0-Disabled
1-Enabled
Example
account.1.codec.1.enable = 1
Parameter-
account.X.codec.Y.payload_type
Configuration File
<MAC>.cfg
Description
Specifies the codec for account X to use.
X ranges from 1 to 6.
Y ranges from 0 to 13.
Format
String
Default Value
When Y=0, the default value is PCMU;
When Y=1, the default value is PCMA;
When Y=2, the default value is G723_53;
When Y=3, the default value is G723_63;
When Y=4, the default value is G729;
When Y=5, the default value is G722;
When Y=6, the default value is iLBC;
When Y=7, the default value is G726_16;
When Y=8, the default value is G726_24;
When Y=9, the default value is G726_32;
When Y=10, the default value is G726_40;
When Y=11, the default value is iLBC_13_3;
When Y=12, the default value is iLBC_15_2;
When Y=13, the default value is GSM.
Range
Valid values are:
 PCMU
 PCMA
 G729
 G722
 G723_53
 G723_63
 G726_16