6-8 IM 760301-01E
• Selecting the Trigger Mode
3. Press the Mode soft key to select Auto or Normal.
• Selecting the Trigger Source
3. Press the Source soft key. A trigger source selection box appears.
4. Press the cursor keys to select any of the elements/wiring units starting with
U1.
5. Press SET to confirm the new trigger source.
• Selecting the Trigger Slope
3. Press the Slope soft key to select
, , or .
• Setting the Trigger Level
3. Press the cursor keys to set the trigger level.
6.4 Setting the Trigger
To Next Page
Loading...
