11-2 IM 760301-01E
11.2 Error Messages and Corrective Actions
Error Messages
There are cases in which error messages are displayed on the screen during operation.
This section describes the meanings of the messages and their corrective actions. The
messages can be displayed either in English or Japanese (see section 3.18). If the
corrective action requires servicing, contact your nearest YOKOGAWA dealer for repairs.
In addition to the error messages listed below, there are communication error messages.
These messages are described in the
Communication Interface User’s Manual
(IM760301-17E)
.
Error in Execution
Code Message Corrective Action Reference Section
11 Cannot measure PLL frequency. Check input level. –
*
601 Invalid file name. Check the file name. 9.3, 9.4
602, No USB device or no storage media inserted. Check the USB device connection, and the 9.1
603 existence of a storage medium in the device.
604 Media failure. Check the storage medium. –
605 File not found. Check the file name and the storage medium. –
606 Media is protected. Set the disk’s (medium’s) write protect switch to –
OFF.
607 Media was removed while accessing. Check the storage medium. –
608, File already exists. – 9.3
609
610 Contains invalid characters. – 9.3
611, Media full. Delete unnecessary file(s) or use another disk. 9.2 to 9.7
612
613 Cannot delete a directory if there are files Delete all the files in the directory to be deleted. 9.7
in the directory.
614 File is protected. – 9.6
615 Physical format error. Reformat the medium. If the same error occurs, 9.2
the instrument is probably unable to execute a
format on this medium.
616 File system failure. Check using another disk. If the same message –
to 620 still appears, maintenance service is required.
621 File is damaged. Check the file. –
622 File system failure. Check using another disk. If the same message –
to 641 still appears, maintenance service is required.
643 Media failure. Check the medium. –
to 653
655 File system failure. Check using another disk. If the same message –
to 664 still appears, maintenance service is required.
665 Cannot load this file format. File was – –
stored on other models or other versions.
666 File is now being accessed. Execute after access is made. –
671 Save data not found. Check for presence of data. 9.3, 9.4
674 Initializing file system. Please wait. 9.2
675 Cannot load this file. – –
Model/options do not conform.
679 Printer error. Maintenance service is required. –
680 Close the cover of the printer unit. – –
*
681 Paper empty. Load a roll chart. –
*
* See the
Communication Interface User’s Manual IM760301-17E
.
To Next Page
Loading...
Need help?
General
