YOKOGAWA wt3000 User Manual

iv IM 760301-01E
Checking the Contents of the Package
Standard Accessories
The standard accessories below are supplied with the instrument.
Item Model/Part No. Quantity Note
Power cord
*1
One of the following power cords is included according to the suffix code on the previous page.
A1006WD 1 UL, CSA standard power cord
Maximum rated voltage: 125 V
A1009WD 1 VDE standard power cord
Maximum rated voltage: 250 V
A1054WD 1 BS standard power cord
Maximum rated voltage: 250 V
A1024WD 1 AS standard power cord
Maximum rated voltage: 250 V
A1064WD 1 GB standard power cord
Maximum rated voltage: 250 V
A1088WD 1 NBR standard power cord
Maximum rated voltage: 250 V
Power fuse A1463EF 1 250 V, 6.3 A, time lag
Attached to the fuse holder
Rubber feet A9088ZM 2 Two pieces in one set. Two sets provided.
Current input B9318FX 1 With four attachment screws
protective cover
Safety terminal 758931 See Same number as the number of installed input elements.
adapter set right 760301: 1 set with 1 hexagonal socket wrench
760302: 2 sets with 1 hexagonal socket wrench
760303: 3 sets with 1 hexagonal socket wrench
760304: 4 sets with 1 hexagonal socket wrench
Printer roll B9316FX 2 For the built-in printer
paper Provided only with option /B5
36-pin A1005JD 1 For D/A output
connector Provided only with option /DA
User’s Manual (Vol 1/3) IM760301-01E 1 This manual
Communication IM760301-17E 1 CD-ROM
Interface User’s Manual (Vol 2/3) (CD-ROM part number: B9318ZZ)
Printed manuals can be purchased separately. Contact your nearest YOKOGAWA dealer.
Expansion Function IM760301-51E 1 Provided on models with suffix code -MV, /G5, /G6, /B5,
User’s Manual (Vol 3/3) /DT, /DA, /V1, /C7, /FL, or /CC.
Rubber feet
A9088ZM
Current input protective
cover
B9318FX
Power fuse
A1463EF
Safety terminal
adapter set
758931
Printer roll paper
B9316FX
36-pin connector
A1005JD
User’s Manual (this manual)
IM760301-01E
Vol 1/3
Expansion Function
User’s Manual
IM760301-51
Vol 3/3
Communication Interface
User's Manual
IM760301-17E (CD-ROM)
Vol 2/3
A1006WD
(-D)
A1009WD
(-F)
A1024WD
(-R)
Power cord (One of the following power cords is included according to the suffix code)
A1054WD
(-Q)
A1064WD
(-H)
A1088WD
(-N)
*1 Make sure that the attached power cord meets the designated standards of the country and area that you are using it in.

YOKOGAWA wt3000 Specifications

General

Brand	YOKOGAWA
Model	wt3000
Category	Measuring Instruments
Language	English