9-1
IM 760301-01E
9
Saving and Loading Data
9.1 PC Card and USB Memory
PC Cards That Can Be Used
The WT3000 supports flash ATA cards (PC card TYPE II) and compact flash (using the
PC card TYPE II adapter). For details, contact your nearest YOKOGAWA dealer.
Note
To use the PC card on the PC, use a PC that supports the PC card. Depending on the PC
that you are using, the PC cards indicated above may not operate properly. Check it
beforehand.
Inserting the PC Card
Insert the PC card into the PC card drive with the front side of the card facing right.
Note
Be sure to insert the PC card all the way in. If it isn’t, the WT3000 may not detect it correctly.
Ejecting the PC Card
Check that the PC card is not being accessed and press the eject button below the PC
card slot.
* Normally, the eject button is retracted. To eject the PC card, press the eject button once to
pop the button out and press it again.
PR
EC
ISIO
N
PO
W
ER A
NA
LYZER
POWER
Front side
Eject button
PC card
Press the eject button once to pop
the button out and press it again.
CAUTION
• The WT3000 may malfunction if the PC card is inserted and ejected within 1-
second time period.
• Do not remove the PC card or turn OFF the power while it is being accessed. If
you do, the data on the PC card may be destroyed.
• An access icon is displayed at the upper left corner of the screen while the PC
card is being accessed.
General Handling Precautions of PC Cards
For the general handling precautions of the PC card, read the instruction manual that
came with the PC card.
Chapter 9 Saving and Loading Data
To Next Page
Loading...
Need help?
General
