ix
IM WT5000-02EN
Update Rate/Averaging Icon
Use this icon to set the data update interval and averaging.
Update Rate/Averaging Menu
Closes the menu
Set the measurement method (for the parameters, see section 2.10).
Set the data update interval (for the parameters, see section 2.10).
Set the response (for the parameters, see section 2.10).
You can use this when the computing method is set to digital filter
average.
Update Rate menu
Averaging menu
Advanced data update interval and averaging settings
For details on the data update interval, see section 2.10.
For details on averaging, see section 2.13.
Turns averaging on and off
Set the averaging type (for the parameters, see section 2.13).
Set the attenuation constant or average count
(for the parameters, see section 2.13).
Menu Icons
To Next Page
Loading...
Need help?
General
