YOKOGAWA WT5000 - Page 101

3-23
IM WT5000-02EN
Procedure Using the Setup Menu
1.
Tap the Setup icon , or press MENU under SETUP.
2.
Tap Computation/Output tab. A computation and output settings overview screen appears.
Pressing ESC closes the overview screen.
Maximum Value Display Mode (Max Hold)
3.
Tap Measure.
An equation setup screen appears.
4.
Tap Max Hold to select ON.
Computation/Output tab
Set equations.
Set computed values (numeric).
Maximum value
display (OFF, ON)
5.
Tap User Defined Functions.
The following screen appears.
Displays the setup screen for user-defined functions (F1 to F5, F6 to F10, F11 to F15, F16 to F20)
Set the computation (OFF, ON).
Set the computation name
(up to 8 characters).
Equation Examples
MAXURMS(E1): Maximum Urm of element 1
MAXIRMS(E1): Maximum Irms of element 1
MAXP(E1): Maximum P of element 1
Enter the unit using up to 8 characters.
3.6 Holding the Maximum Values