7-3
IM WT5000-02EN
• When the Storage Mode Is Real Time
Computation/Output tabConfigure the storage.
Storage control setup screen (when the storage mode is Real Time)
Set the storage interval
(see page 7-2).
Set the scheduled storage start time.
Set the scheduled storage end time.
Set whether to save (store) numeric data at the start of
storage.
You cannot set this when the storage interval is set to 00:00:00.
OFF: Not be saved
ON: Saved
Setting the Scheduled Start Time
Tap Start Time or End Time. A Real-time Control screen appears.
Scheduled storage start time
Set the scheduled start and stop times
(Year/month/day, 00 hours : 00 minutes : 00 seconds to 23 hours : 59 minutes : 59 seconds).
Set the scheduled time
to the current time.
Scheduled storage end time
Set the scheduled time to
the integration start time.
Tap Start.
Tap End.
7.1 Setting the Storage Operation
To Next Page
Loading...
Need help?
General
