YOKOGAWA WT5000 - Page 23

1-5
IM WT5000-02EN
Measurement Range Configuration Settings (Range Config)
► section 2.5
3.
Tap Range Config. A measurement range configuration setup screen appears.
Input (Advanced/Options) tab
Range config button
Specify the measurement range to switch to
when a peak over-range occurs.
Button for
displaying the valid
measurement range
setup screen
Currently specified valid measurement ranges
Measurement ranges that are not valid appear dimmed.
The background of the specified measurement range to switch
to when a peek over-range occurs (Peak Over Jump) is
displayed in blue.
Switches between
voltage and current
Line Filter Settings (Line Filter) ► section 2.7
3.
Tap Line Filter. A line filter setup screen appears.
The following screen is an example when
Advanced Settings are on. You can set the HFR, AAF, DLF (N) and DLF (H) filters separately.
Input (Advanced/Options) tab
Line Filter button
Turns the advanced line filter settings on and off
Filter type
Digital line filter
(for harmonic
measurement)
Digital line filter
(for normal
measurement)
Anti-aliasing
filter
HF Rejection
1.2 Input Settings Overview