To Next Page

To Previous Page

2-5

IM WT5000-02EN

2.2 Setting the Voltage Range and Current Range

Setting the Current Range (Current Range) When the Input

Element Is 760901 or 760902

Tap Current Range of the input element number you want to configure. A current range setup

menu appears.

Follow the instructions below to set the current range.

• Sets auto range mode

Tap Auto. The AUTO key illuminates.

• Setting the Fixed Range

Tap Current Range. A current range menu appears.

Tap a current range on the menu to set the current range.

Set the current range to auto.

Select the current range.

Current range (example of element 1)

Turns the external current sensor on or off (see section 2.3).

Configure the current sensor (see section 2.3).

Operations in the Input Information Area

See page 2-8.

Available current range options

• 30 A Input Element 760901

When the Crest Factor Is Set to CF3 When the Crest Factor Is Set to CF6 or CF6A

500 mA, 1 A, 2 A, 5 A, 10 A, 20 A, 30 A 250 mA, 500 mA, 1 A, 2.5 A, 5 A, 10 A, 15 A

• 5 A Input Element 760902

When the Crest Factor Is Set to CF3 When the Crest Factor Is Set to CF6 or CF6A

5 mA, 10 mA, 20 mA, 50 mA, 100 mA,

200 mA, 500 mA, 1 A, 2 A, 5 A

2.5 mA, 5 mA, 10 mA, 25 mA, 50 mA, 100 mA,

250 mA, 500 mA, 1 A, 2.5 A

Note

WhenrangeΣlink(seesection2.1)issettoon,thecurrentrangesoftheinputelementsassignedtothe

samewiringunitaresettothesamerange.WhenrangeΣlinkissettooff,thecurrentrangesoftheinput

elements can be set independently even when they are assigned to the same wiring unit.

YOKOGAWA WT5000 User Manual

Other manuals for YOKOGAWA WT5000