Symbologies 11 - 81
Data Matrix Inverse
Parameter # 588 (SSI # F1h 4Ch)
This parameter sets the Data Matrix inverse decoder setting. Options are:
•
Regular Only - the digital scanner decodes regular Data Matrix bar codes only.
•
Inverse Only - the digital scanner decodes inverse Data Matrix bar codes only.
•
Inverse Autodetect - the digital scanner decodes both regular and inverse Data Matrix bar codes.
Maxicode
Parameter # 294 (SSI # F0h, 26h)
To enable or disable Maxicode, scan the appropriate bar code below.
Regular
(0)
Inverse Only
(1)
*Inverse Autodetect
(2)
Enable Maxicode
(1)
*Disable Maxicode
(0)
To Next Page
Loading...
