Zebra DS3608

APPENDIX A STANDARD DEFAULT
PARAMETERS
Table A-1 Parameter Defaults
Parameter
Parameter
Number
SSI Number Default
Page
Number
User Preferences
Set Default Parameter N/A N/A Restore Defaults 4-5
Report Version 4-6
Parameter Bar Code Scanning 236 ECh Enable 4-6
Beep After Good Decode 56 38h Enable 4-7
Direct Decode Indicator 859 F2h 5Bh Disable 4-8
Beeper Volume 140 8Ch High 4-9
Beeper Tone 145 91h Medium 4-10
Beeper Duration 628 F1h 74h Medium 4-11
Suppress Power Up Beeps 721 F1h D1h Do Not Suppress 4-11
Decode Pager Motor 613 F1h 65h Enable 4-12
Decode Pager Motor Duration 626 F1h 72h 150 msec 4-12
Low Power Mode 128 80h Disable 4-14
Time Delay to Low Power Mode 146 92h 1 Hour 4-15
Hand-Held Trigger Mode 138 8Ah Level 4-17
Hands-Free Mode 630 F1h 76h Enable 4-18
Hand-Held Decode Aiming
Pattern
306 F0h 32h Enable 4-19