Zebra DS3608

OCR Programming 13 - 5
Enable/Disable OCR-B
Parameter # 681 (SSI # F1h A9h)
To enable or disable OCR-B, scan one of the following bar codes.
NOTE OCR is not as secure as a bar code. To decrease OCR misdecodes and speed OCR reading, set an
accurate OCR template and character subset, and use a check digit. See OCR Subset on page 13-13 and
OCR Template on page 13-15.
NOTE All OCR fonts are disabled by default. Enabling OCR can slow bar code decoding. Enabling more than
one OCR font could also slow OCR decoding and impact OCR decoding accuracy.
Enable OCR-B
(1)
*Disable OCR-B
(0)