Zebra LI4278 - Beeper Duration; Hand-Held Trigger Mode

USER PREFERENCES & MISCELLANEOUS SCANNER OPTIONS 5 - 9
Beeper Duration
Parameter # 628
To select the duration for the beeper, scan one of the following bar codes.
Hand-Held Trigger Mode
Parameter # 138
Select one of the following trigger modes for the linear imager scanner:
• Standard (Level) - A trigger pull activates decode processing. Decode processing continues until the bar
code decodes, you release the trigger, or the Decode Session Timeout occurs.
• Auto Aim - This trigger mode projects the red illumination when you lift the linear imager scanner. A
trigger pull activates decode processing. After 2 seconds of inactivity the aiming pattern shuts off.
Short
(00h)
*Medium
(01h)
Long
(02h)
*Standard (Level)
(00h)
Auto Aim
(09h)