CHAPTER 8 USB INTERFACE
Introduction
This chapter provides instructions for programming the cradle to interface with a USB host. The linear imager
scanner cradle connects directly to a USB host, or a powered USB hub. The USB host can power the cradle
and recharge the linear imager scanner battery, but this charging method has limitations. See Supplying Power
to the CR0078-S/CR0008-S Cradle on page 1-8.
Throughout the programming bar code menus, default values are indicated with asterisks (
*).
*North American Standard USB Keyboard
Feature/Option
*Indicates Default
NOTE The CR0078-S cradle has the ability to be powered by the USB port instead of an external power supply.
The CR0078-P can only receive power via an external power supply.
To Next Page
Loading...
