Zebra LI4278 - Time Delay to Presentation Sleep Mode

5 - 12 LI4278 Product Reference Guide
Time Delay to Presentation Sleep Mode
Parameter # 662
In Presentation Mode, this parameter sets the time the linear imager scanner remains active before entering
sleep mode with no illumination. The linear imager scanner wakes when it senses motion, upon presentation of
a bar code, or a trigger pull.
NOTE Linear imager scanner performance is not guaranteed in dim conditions.
Disable
(00h)
1 Second
(01h)
10 Seconds
(0Ah)
1 Minute
(11h)
*5 Minutes
(15h)