Zebra LI4278 - Hands-Free Scanning

SCANNING 2 - 7
Hands-Free Scanning
The linear imager scanner is in hands-free (presentation) mode when it sits in the CR0078-P cradle. In this
mode the linear imager scanner operates in continuous (constant-on) mode, where it automatically decodes a
bar code presented in the field of view. The scanner LED is on, solid green
To scan:
1. Ensure all connections are secure (see appropriate host chapter).
2. Present the bar code in the linear imager scanner field of view.
Figure 2-2 Presentation Scanning
3. Upon successful decode, the linear imager scanner beeps and the green LED momentarily turns off. (For
more information about beeper and LED definitions, see Table 2-1 and Table 2-2.)