Zebra LI4278 - IBM 468 X;469 X Host Parameters; Port Address

9 - 4 LI4278 Product Reference Guide
IBM 468X/469X Host Parameters
Port Address
This parameter sets the IBM 468X/469X port used.
NOTE Scanning one of these bar codes enables the RS-485 interface on the linear imager scanner.
*None Selected
Hand-held Scanner Emulation (Port 9B)
1
Non-IBM Scanner Emulation (Port 5B)
Table-top Scanner Emulation (Port 17)
NOTE
1
User selection is required to configure this interface and this is the most common selection.