Zebra LI4278 - Dump Scanner Parameters

5 - 24 LI4278 Product Reference Guide
Dump Scanner Parameters
For debugging a scanner problem, scan the programming bar code below to output all the scanner's asset
tracking information, and parameter settings. The information is output to a text document in a human readable
format.
Scan STISCANPARAMS with the scanner connected in USB HID keyboard mode to Microsoft
® Windows
Notepad or Wordpad, or with the scanner connected via RS232 to a Windows Hyperterminal. The
parameter/attribute numbers in this output can be interpreted using parameter numbers in this guide, or the
Attribute Data Dictionary (index of parameters). The Attribute Data Dictionary (72E-149786-xx) can be found
using the Zebra Support site at: http://www.zebra.com/support
.
NOTE If may be necessary to first scan "<DATA><SUFFIX1>" for proper formatting. (See Scan Data
Transmission Format on page 5-20.)
STISCANPARAMS