Getting Started 1 - 7
2. Carefully press and briefly hold the tip of stylus on the center of each target that appears on the screen.
3. Repeat as the target moves around the screen, then tap the screen to continue.
Network Activation
Network activation is dependent upon the network type. When an GSM/UTMS SIM card is installed in the
MC67ND, upon startup the MC67ND is configured for the GSM/UTMS network.
Activating an MC67ND on a CDMA Network
To activate on a CDMA network:
1. Setup an account with the CDMA carrier. Provide the MEID number (located under the battery of the
MC67ND) to the customer service representative.
2. Tap Start > Settings > Connections > Network Setup & Activation. The Network Setup & Activation
window displays.
Figure 1-6
Network Setup and Activation Setup Window
3. Tap Switch to CDMA.
4. The window closes.
5. Tap Network Setup & Activation.
6. Tap Activation. The CDMA Activation window appears.
7. Tap Start Activation and PRL Update.
8. Follow the on-screen instructions.
For detailed information for configuring the phone and activating on a different network, refer to the MC67
Integrator Guide.
Switching from CDMA to GSM/UMTS
To switch from a CDMA network to a GSM/UTMAS network:
1. Tap Start > Settings > Connections > Network Setup & Activation. The Network & Activation window
appears.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
