Zebra MC67 Integrator Guide

WAN CDMA Configuration 5 - 5
5. Tap End.
To disable call forwarding:
1. Enter *73 on the phone keypad.
2. Tap Talk.
3. A beep sounds indicating deactivation.
4. Tap End.
Call Waiting
Call waiting notifies the user of an incoming call when the phone is in a phone session. This service is setup
when an account is opened with the service provider.
Voice Mail and Short Message Service (SMS)
This service is setup when an account is opened with the service provider.
Network Time Synchronization
The MC67ND can be configured to synchronize the clock with the time from the carrier network. A registry key
on the MC67ND has to be created to enable this feature.
Using a registry editor, navigate to the following:
[HKEY_LOCAL_MACHINE\SOFTWARE\Symbol\RIL\RHA\PH8]
Create the following key:
“SyncSystemTime”=dword:00000001
where:
dword:0 = disabled
dword:1 = enabled
After setting the registry key, warm boot the MC67ND.
NOTE Call Waiting may not be available on all networks. Check with your service provider for availability.

Zebra MC67 Specifications

General

Display diagonal	3.5 \
Display resolution	640 x 480 pixels
Display number of colors	-
Flash memory	2 GB
Internal memory	0.512 GB
Internal memory type	RAM
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Processor family	Instruments OMAP
Processor frequency	0.8 GHz
Processor manufacturer	Texas Instruments
USB 2.0 ports quantity	1
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Battery capacity	3600 mAh
Data network	4G, HSPA+
Wi-Fi standards	802.11a, 802.11b, 802.11g
Product color	Black
Keyboard layout	QWERTY
Operating system installed	Windows Mobile 6.5

Weight and Dimensions

Depth	33.5 mm
Width	77 mm
Height	162.2 mm
Weight	385 g