WAN CDMA Configuration 5 - 3
CDMA Settings
Use the Phone Settings window to customize CDMA phone settings, such as the ring type and ring tone for
incoming calls and other options depending on the type of service.
Phone
Use the Phone tab to customize ring type, ring tone and keypad tone when entering phone numbers.
1. Tap Start > Settings > Personal > Phone.
Figure 5-3
Phone Window - Phone Tab
2. Select a ring type from the Ring type: drop-down list. The ring type changes the way the MC67ND rings to
notify the user of an incoming call. Regardless of the ring type selected, a dialog box appears on the
display for incoming calls.
3. Select a ring tone for incoming calls from the Ring tone: drop-down list. To hear a sample of the selected
ring tone, tap . Tap to end the ring tone.
4. Select a keypad tone from the Keypad: drop-down list. This selection determines the tone that sounds
when entering a phone number on the keypad.
a. Select Short Tones for a tone that sounds only for one or two seconds.
b. Select Long Tones for a continuous sound for as long as the number on the keypad is pressed.
c. Select Off to disable tones.
5. Select the Notify me when voice privacy is unavailable check box to receive a message when dialing.
6. Tap OK to exit settings.
Phone Information
Use the Phone Info tab to view phone number and version information.
NOTE To use custom .wav, .mid or .wma files as ring tones, use ActiveSync on the host computer to copy the file
to the /Windows/Rings folder on the MC67ND. Then, select the sound from the ring tone list.
NOTE Turning off sounds saves power and prolongs battery life.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
