4 - 16 MC67 Integrator Guide
where:
dword:0 = disabled
dword:1 = enabled (default)
After setting the registry key, warm boot the MC67.
Service Provider Name Display
The reg key (“UseServiceProviderName”) originally was used to fix the dual-line SIM card issue with value 2.
But for the Italian Post, the value 1 should be used to show the virtual carrier name (Poste Mobile).
[HKEY_LOCAL_MACHINE\Software\Microsoft\RIL]
“UseServiceProviderName”=dword:1
where:
dword:0 = Display network provider name
dword:1 - Display service provider name (default)
dword:2 - Display both network provider and service provider name
To Next Page
Loading...