Accessories 2 - 3
Single Slot USB Cradle
This section describes how to set up and use a Single Slot USB cradle with the MC67. For USB
communication setup procedures see Chapter 3, Synchronization.
The Single Slot USB cradle:
•
Provides 5.4 VDC power for operating the MC67.
•
Synchronizes information between the MC67 and a host computer. See Chapter 3, Synchronization for
information on setting up a partnership between the MC67 and a host computer.
•
Charges the MC67’s battery.
•
Charges a spare battery.
Setup
Figure 2-1
Single Slot USB Cradle Power and USB Connections
Charging the MC67 Battery
Connect the cradle to power. Insert the MC67 into the MC67 slot to begin charging.
Power Supply
USB Port
Power Port
AC Line Cord
To Next Page
Loading...