Zebra MC67 Integrator Guide

2 - 14 MC67 Integrator Guide
Figure 2-14 Name Servers Tab
6. Enter the appropriate DNS, Alt DNS, WINS, and Alt WINS server addresses.
7. Tap ok.
Figure 2-15 Adapters Dialog Box
8. Tap ok to confirm the setup.
9. Tap ok to exit.
Charging
Insert the MC67 into a slot to begin charging. The MC67’s charge LED shows the status of the battery charging
in the MC67. See Table 1-1 on page 1-6 for charging status indications. The 3600 mAh battery fully charges in
approximately six hours.
Charge batteries in temperatures from 0 °C to 40 °C (32 °F to 104 °F). Charging is intelligently controlled by the
MC67.
To accomplish this, for small periods of time, the MC67 alternately enables and disables battery charging to
keep the battery at acceptable temperatures. The MC67 indicates when charging is disabled due to abnormal
temperatures via its LED. See Table 1-1 on page 1-6.

Zebra MC67 Specifications

General

Display diagonal	3.5 \
Display resolution	640 x 480 pixels
Display number of colors	-
Flash memory	2 GB
Internal memory	0.512 GB
Internal memory type	RAM
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Processor family	Instruments OMAP
Processor frequency	0.8 GHz
Processor manufacturer	Texas Instruments
USB 2.0 ports quantity	1
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Battery capacity	3600 mAh
Data network	4G, HSPA+
Wi-Fi standards	802.11a, 802.11b, 802.11g
Product color	Black
Keyboard layout	QWERTY
Operating system installed	Windows Mobile 6.5

Weight and Dimensions

Depth	33.5 mm
Width	77 mm
Height	162.2 mm
Weight	385 g