Zeiss Humphrey Field Analyzer 3 - Set up Test Profiles; To Create a New Test Profile; Delete Test Profiles and Patterns

Setup and Testing Go to Contents
HFA3 Instructions for Use 2660021166131 Rev. A 2018-11
4-24
Set up Test Profiles
Test Profiles comes with a standard set of tests. Test profiles can be modified or deleted except for
the 24-2 SITA Standard test and the default test.
To create a new test profile:
1. Go to Set
tings > Specific Settings > Test Profiles > Create
New Test Profile.
2. Choose the desired test parameters by using th
e drop-down
menus. See Appendix (A), "Test Patterns & Parameters", for further
details about test parameter settings.
Note: Once a
specific test type is selected from the Test Type
drop-down menu, the screen automatically displays only the options
that are available for that test type.
3. Select the Reports desired for the new test profile.
4. Enter a name and select Save to add t
he new test profile to the list
located on the left-hand side of the screen.
Note: To make a test the default, highlight the test name and select Make Default. This test will now
be automatically selected when a new patient is created.
The test is now accessible from the Test Profile menu on the Pa
tient screen.
Delete Test Profiles and Patterns
To delete a custom test profile or test pattern:
1. Go to Set
tings > Specific Settings > Test Profiles or Custom Test Patterns.
2. Hold down on the test profile or pattern to be deleted and wait for a circle to be drawn around
your finger
. Release your finger to bring up a pop-up menu. Select Delete.
or
Right-click on the test profile with a mouse to bring up the pop-up menu. Select Delete.
3. A message will appear to confirm your deletion. Select Ye
s or No.