Data Synchronization Go to Contents
HFA3 Instructions for Use 2660021166131 Rev. A 2018-11
10-2
Installation & Configuration of Data Synchronization Function
Summary of Data Synchronization Set-up Steps
Detailed Data Synchroniz
ation Set-up Steps
• “Scenario 1: Turn ON Data Synchronization Functionality for Two or More
HFA3,” on page 10-2 describes Data Synchronization for two or mo
re HFA3 instruments
and explains how to turn on the Data Synchronization function in each HFA3 instrument.
• “Scenario 2: HFA II-i (one or more) and HFA3 (one or more) Data
Synchronization,” on page 10-6 describes Data Synchronization for
one or more HFAII-i
and HFA3 instruments and explains how to turn on
the Data Synchronization function and
transfer the data.Scenario 1: Two or more HFA3 - Data Synchronization
Step Time Required Status of Instrument
Upgrade all HFA II-i to version 5.0 or
5.
1 and connect to the same network.
0.5 - 1 hour HFA II-i cannot be used during
software upgrade.
Upgrade all the HFA3 to version 1.5
and connect to
the same network.
0.5 - 1 hour HFA3 cannot be used during
software upgrade.
Configure HFA II-i to Dat
a
Synchronization mode with HFA3 (if
applicable).
15 - 30 minutes HFA3 and HFA II-i cannot be used.
HFA II-i Data Transfer to HFA3 (if
applicab
le).
1 - 10 hours HFA II-i cannot be used.
Configure all HFA3 to D
ata
Synchronization mode.
5 - 10 minutes HFA3 cannot be used.
HFA3 synchronizes all tests between
HF
A3 instruments.
2 - 48 hours HFA3 instruments can be used but
only have access to patients and
tests on that instrument’s database.
Synchronization complete. Restart all
HF
A3 instruments.
10 minutes After restart, all HFA3 are in full
synchronized Data Synchronization
mode.
Table 10-1 Summary of Data Synchronization Set Up Steps
Step Description
Scenario 1: Turn ON Data Synchronization Functionality for Two or More HFA3
1. Meet precondition requirements. Upgrade all the HFA3 instruments to version 1.5 and ensure each is connected to the same
network with DHCP.
Table 10-2 Scenario 1: Turn ON Data Synchronization Functionality in HFA3