HFA3 Instructions for Use 2660021166131 Rev. A 2018-11
Go to Contents Data Synchronization
10-3
2. Log in to Service From main Patient screen, select the Change user from the Close button menu.
Use drop down menu to select login option Service.
Password is 00
00 (four zero’s)
Note: The
Synchronization function is only available through the Service login.
3. Select Settings Select Sett
ings > Service
Go to Syn
chronization > Start/Stop Synchronization > select Enabled
Click on Back.
The circle arrow icon indicates that the HFA3 needs
to be restarted after this selection.
Confirm the restart by selecting OK. After shu
tdown the HFA3 needs to be restarted.
Login as Administr
ator.
Step Description
Table 10-2 Scenario 1: Turn ON Data Synchronization Functionality in HFA3
To Next Page
Loading...
