Quick Reference Guide
HFA3 Quick Reference Guide 2660021166131 Rev. A 2018-11
5-2
Test Setup
1. For an existing patient the previous test that was used will automatically display.
Otherwise, the 24-2 SITA FASTER is the default test.
2. If needed, select a different test from the T
est Profile menu. The new test profile,
pattern, and strategy now displays.
3. If a specific test is not in the Test Profile
menu, swipe down on the page and use the
Test Parameters menu to select new test parameters.
4. Use the Pe
rform test on drop-down menu to select which eye to test: OD (right), OS
(left) or Both. Default is both.
5. To add notes select Add
Note.
6. Change the default Reports by selecting or deselecting one or mor
e Reports from the
drop-down menu.
7. Enter IOP (intraocular pressure) and Visual Acuity if desired.
8. Confirm test information and select the Next button to pr
oceed.
Trial Lens Setup
The Auto Trial Lens Correction (AutoTLC) automatically adjusts the spherical correction to the Trial
L
ens value. This feature is only available on Model 860.
For all other models insert manual trial lens
into the holder:
1. Move the trial lens holder into an upright position from its storage position in the
bottom of the bowl (A).
2. Place the spherical lens in the slot closest to t
he patient and the handle to the right for
the OD eye and to the left for the OS eye (B).
To Next Page
Loading...
