Chapter 13 Switch Setup
IES-1248-51V User’s Guide
110
13.3 Switch Setup Screen
To open this screen, click Basic Setting > Switch Setup.
Figure 52 Switch Setup
The following table describes the labels in this screen.
Table 16 Switch Setup
LABEL DESCRIPTION
MAC Address
Learning
Aging Time
Enter a time from 10 to 10,000 seconds. This is how long all
dynamically learned MAC addresses remain in the MAC address table
before they age out (and must be relearned). Enter 0 to disable the
aging out of MAC addresses.
GARP Timer Switches join VLANs by making a declaration. A declaration is made
by issuing a Join message using GARP. Declarations are withdrawn by
issuing a Leave message. A Leave All message terminates all
registrations. GARP timers set declaration timeout values. Click here
for more information on VLANs.
To Next Page
Loading...