IES-1248-51V User’s Guide
437
CHAPTER 59
Packet Filter Commands
Use the following packet filter commands to filter out specific types of packets on
specific ports.
59.1 Command Summary
The following section lists the commands for this feature.
Table 163 pktfilter Command Summary
COMMAND DESCRIPTION P
switch pktfilter show [portlist] Displays the packet type filter settings on the specified
xDSL port(s) or on all xDSL ports if no port is specified.
portlist: You can specify a single xDSL port <1>, all
xDSL ports <*> or a list of xDSL ports <1,3,5>. You
can also include a range of ports <1,5,6~10>.
M/L
To Next Page
Loading...