ZyXEL Communications IES-1248-51A - Packet Filter Set Command Example; Packet Filter Pppoe Only Command Example

Chapter 59 Packet Filter Commands
IES-1248-51V User’s Guide
439
appears for all of the packet types. With PPPoE only, the IES-1248-51V rejects all
packet types except for PPPoE (packet types that are not listed are also rejected).
59.1.2 Packet Filter Set Command Example
The following example sets xDSL port 9 to reject ARP, PPPoE and IGMP packets.
59.1.3 Packet Filter PPPoE Only Command Example
The following example sets xDSL port 1 to accept only PPPoE packets.
ras> switch pktfilter show 9
V: pass through, -: filter out, #:Don't care
E: Enable, D: Disable
port pppoe ip arp netbios dhcp eapol igmp | PPPoE-Only
1 # # # # # # # | E
2 - V V - V V V | D
ras> switch pktfilter set 9 arp pppoe igmp
ras> switch pktfilter pppoeonly 1